热疗贴理疗贴膏药制作机器 小型自动模压膏药机 手工制作膏药机

膏药机技术参数
时间控制器：0．1~9．9s  可调温度控制器：室温一100℃  可调医用无油空压机：22OV/180W，工作压力0．1Npa  电加热器：220V/1000W  使用方法  接通电源，将熬制好的药物倒入桶内，按下加热开关，设置好温度，[一般滩涂的温度在70°左右就可以了].桶内开始加热，到设定温度后。旋转工作开关，出药嘴下方放好药布，踏脚踏开关，生产开始。刚开始时，用天平抽样检测剂量，根据剂量变化趋势，增减预置时间使剂量准确。该机已使用 3年多，性能稳定，剂量准确，误差不**过±3%，尤其是操作简便，省时省力，提高了工作效率，每小时生产 1200贴左右，可满足一般中小医院制剂室的需要。
黑膏药机产品简介
从工艺角度上可分为以下膏药机械机型，这几种膏药机机型共同组成一条膏药机生产线。具体如下：  1：膏药加工的一道工艺设备叫做膏药搅拌罐，这是一种初级膏药机，二道工艺设备叫做膏药涂布机，这是常见的膏药机，*三道工艺设备叫做膏药成型机，*四道工艺设备叫做膏药打孔机，其间还有液体膏药制作的膏药灌装机。
From the technological point of view, it can be divided into the following plaster machine models, which together constitute a plaster machine production line. Specifically as follows: 1: The first process equipment of paste processing is called paste mixing tank, which is a primary paste machine, the second process equipment is called paste coating machine, which is a common paste machine, the third process equipment is called paste forming machine, the fourth process equipment is called paste drilling machine, and there are liquid paste in between. The plaster filling machine is made.
一道工艺用膏药搅拌缺罐，负责膏药胶或膏药基质，膏药原材料和药粉的搅拌，并达到均匀效果，粘度也要合适，二道工艺用膏药涂布机负责把搅拌好的含有药物的混合物均匀地涂在膏药布上，*三道工艺是把从膏药涂布机上涂好药的膏药片切成一块一块的，用得是膏药成型机，*四道工艺是把已成型膏药贴打一些孔，增加膏药膏药中药物的渗透功能。
In the first process, paste mixer is used to mix the lack of pots, which is responsible for paste glue or paste matrix, paste raw materials and powder, and achieve uniform effect. The viscosity should also be appropriate. In the second process, paste coating machine is used to uniformly coat the mixtures containing drugs on the paste cloth. In the third process, paste coating is used to uniformly coat the mixture containing drugs from the paste. The plaster slices coated on the machine are cut into pieces, which are used in plaster forming machine. The fourth process is to punch some holes in the plaster paste to increase the penetration function of the plaster.